Flame Control Flame Retardant paints, varnishes, and mastics have been tested in accordance with UL and ASTM standards. Our class A and B rated coatings comply with federal, state, and local building and fire codes. These coatings are designed to retard the spread of flames and reduce heat penetration through the use of intumescent technologies.
TemperKote Heat Resistant products represent the very latest in high temperature coating technologies. With their color stable properties, they provide a protective and decorative finish to metal surfaces up to 1500 degrees. Extensive corrosion testing has been performed on our industry-leading primers and topcoats to give you the confidence that your substrate will be protected against corrosion and weathering.
Our team also can provide the technical assistance and recommendations necessary to ensure you have the right coating for the job.
The rate at which air can diffuse or leak through a unit area of material induced by a specific pressure differential (for example 75 Pa or 1.57 lb/ft2). ASTM E 2178 and ASTM E 283 are test methods used to measure air permeance. Units are L/s•m2 (ft3/min•ft2) with pressure reported as Pa (lb/ft2).
SPFA believes that the path to a healthful, safe, high-quality and performing SPF installation travels through the hands of a knowledgeable, trained, experienced, and ideally PCP-certified professional contractor.